2018 FLOW M500 3036 XD 89K psi 10' x 20'
Have one to sell?
ConditionUsed
1 available
FLOW M500 3060 XD Waterjet Cutter 20, 2018 model, used. Efficient and reliable, this equipment is ideal for precision cutting needs. A perfect opportunity to enhance your production capabilities.
Key Machine Specifications: Cutting Envelope: 10' x 20'. Cutting Head: Dynamic Waterjet XD enables full 5-axis cutting (up to 60-degree tilt) with active taper control and stream-lag compensation. Pump Options: Typically paired with an ultra-high-pressure intensifier pump (such as the HyperJet) operating at pressures up to 94,000 PSI, or a 60,000 PSI direct-drive. Tolerance: Linear positional accuracy of ± 0.0127 mm (± 0.0005") and repeatability of ± 0.02 mm (± 0.0008"). Z-Axis Travel: Standard 12-inch travel, allowing processing of very thick plates and stock materials. Flagship Features. Heavy-Duty Architecture: The all-steel, two-piece construction isolates the drive components from the abrasive catcher tank, ensuring long-term structural integrity and eliminating vibration during rapid traverse (up to 17.8 m/min). Advanced Software Suite: Integrates natively with Flow's proprietary software (such as FlowXpert and FlowNest) to automatically calculate complex 3D bevels and optimize material nesting without requiring G-code programming. Continuous Abrasive Delivery: Features a self-contained, large-capacity garnet hopper that enables continuous cutting operations without interrupting workflow.
Key Machine Specifications: Cutting Envelope: 10' x 20'. Cutting Head: Dynamic Waterjet XD enables full 5-axis cutting (up to 60-degree tilt) with active taper control and stream-lag compensation. Pump Options: Typically paired with an ultra-high-pressure intensifier pump (such as the HyperJet) operating at pressures up to 94,000 PSI, or a 60,000 PSI direct-drive. Tolerance: Linear positional accuracy of ± 0.0127 mm (± 0.0005") and repeatability of ± 0.02 mm (± 0.0008"). Z-Axis Travel: Standard 12-inch travel, allowing processing of very thick plates and stock materials. Flagship Features. Heavy-Duty Architecture: The all-steel, two-piece construction isolates the drive components from the abrasive catcher tank, ensuring long-term structural integrity and eliminating vibration during rapid traverse (up to 17.8 m/min). Advanced Software Suite: Integrates natively with Flow's proprietary software (such as FlowXpert and FlowNest) to automatically calculate complex 3D bevels and optimize material nesting without requiring G-code programming. Continuous Abrasive Delivery: Features a self-contained, large-capacity garnet hopper that enables continuous cutting operations without interrupting workflow.
| Bulk Material Hopper |
| Ebbco Sand Filtration System |
| Ebbco Water Chiller |
| Safety Railings |
Extremely good condition. Was used as a support machine.
XD Dynamic Head. Bevels for pre weld assembly is extremely easy.
Has water chiller. This keeps the water cool as cutting happens even further increasing the life and consistency of the repeatability to machine.
Garrnet remove is maybe the most important assets included in this package. Depending on how much you are cutting you are down fro 2-4 days each quarter.
We use cookies to improve your experience. Privacy Policy.